Aluminum Alloy Cables 6201 T81 (AAAC)
Aluminum Alloy Cables 6201 T81 (AAAC)
Conductor formed by 6201 T81 Aluminum Alloy wires.
Read more48.69 kcmil
Nexans ref. 210676
- Conductor flexibility: Class A
- Type of cable: Alton
- Outer Diameter: 6.36 mm
- Number of aluminium wires: 7
- Diameter of aluminium wires: 2.12 mm
- Conductor cross-section: 48.7 kcmil
- Aluminium cross-section: 24.7 mm²
- Approximate weight: 67.7 kg/km
- Max. DC resistance of the conductor at 20°C: 1.383 Ohm/km
- Ampacity: 143.0 A
- Short Circuit Current 1 s Max : 2.6 kA
- Minimum breaking load: 799 kgf
77.47 kcmil
Nexans ref. 200057
- Conductor flexibility: Class AA
- Type of cable: Ames
- Outer Diameter: 8.02 mm
- Number of aluminium wires: 7
- Diameter of aluminium wires: 2.67 mm
- Conductor cross-section: 77.5 kcmil
- Aluminium cross-section: 39.25 mm²
- Approximate weight: 107.13 kg/km
- Max. DC resistance of the conductor at 20°C: 0.872 Ohm/km
- Ampacity: 191.0 A
- Short Circuit Current 1 s Max : 4.2 kA
- Minimum breaking load: 1272 kgf
123.3 kcmil
Nexans ref. 200058
- Conductor flexibility: Class AA
- Type of cable: Azusa
- Outer Diameter: 10.11 mm
- Number of aluminium wires: 7
- Diameter of aluminium wires: 3.37 mm
- Conductor cross-section: 123.3 kcmil
- Aluminium cross-section: 62.48 mm²
- Approximate weight: 170.49 kg/km
- Max. DC resistance of the conductor at 20°C: 0.547 Ohm/km
- Ampacity: 256.0 A
- Short Circuit Current 1 s Max : 6.7 kA
- Minimum breaking load: 1940 kgf
155.4 kcmil
Nexans ref. 209804
- Conductor flexibility: Class AA
- Type of cable: Anaheim
- Outer Diameter: 11.35 mm
- Number of aluminium wires: 7
- Diameter of aluminium wires: 3.78 mm
- Conductor cross-section: 155.4 kcmil
- Aluminium cross-section: 78.74 mm²
- Approximate weight: 214.81 kg/km
- Max. DC resistance of the conductor at 20°C: 0.435 Ohm/km
- Ampacity: 296.0 A
- Short Circuit Current 1 s Max : 8.4 kA
- Minimum breaking load: 2445 kgf
195.7 kcmil
Nexans ref.
- Conductor flexibility: Class AA
- Type of cable: Amherst
- Outer Diameter: 12.74 mm
- Number of aluminium wires: 7
- Diameter of aluminium wires: 4.25 mm
- Conductor cross-section: 195.7 kcmil
- Aluminium cross-section: 99.2 mm²
- Approximate weight: 272.1 kg/km
- Max. DC resistance of the conductor at 20°C: 0.344 Ohm/km
- Ampacity: 342.0 A
- Short Circuit Current 1 s Max : 10.6 kA
- Minimum breaking load: 3079 kgf
Description
Description
Standards
-
ProductASTM B 398; ASTM B 399
Application
AAAC CENTELSA by Nexans cables are used in overhead power transmission and distribution networks. They are also used as a supporting neutral for multiplex type overhead distribution cables.
Note: Any other application or use not described above is considered prohibited.
Construction
Concentric conductor formed by 6201 T81 aluminum alloy wires.
Applicable Standards
- ASTM B398, NTC 2729
- ASTM B399, NTC 2730
Certificate
RETIE N°05424
Ampacity Conditions
- Current capacity at ambient temperature 25°C, conductor temperature 75°C, solar emission 1kW/m², absorption and emissivity coefficients 0.5, wind speed 610 mm/sec, at sea level and at 60 Hz.
- Short circuit current for one (1.0) second, at initial temperature of 75°C and final temperature of 340°C.
NOTE:
- The data reported here are nominal and are subject to tolerances according to standards and normal manufacturing practices.
- Other configurations not specified in this catalog may be available under special request and minimum manufacturing quantitie
Characteristics
Characteristics
Construction characteristics
Construction characteristics
Conductor material
Aluminium Alloy
Mechanical characteristics
Mechanical characteristics
Hardness type
T81
Usage characteristics
Usage characteristics
Maximum operating temperature
75 °C
Resources
Resources
Our websites
Select your country to find our products and solutions
-
Africa
- Africa
- Ghana
- Ivory Coast
- Morocco
- North West Africa
- Americas
- Asia
- Europe
- Oceania