CABLES BAJO CONTENIDO DE HALÓGENOS LHFR-LS AL S8000 90°C

Products

1/0AWG

Nexans ref. 209785

  • Approximate weight: 246.7 kg/km
  • Conductor cross-section: 53.5 mm²
  • Nominal insulation thickness: 2.03 mm
  • Nominal outer diameter: 12.71 mm
  • Ampacity: 135.0 A
  • Max. DC resistance of the conductor at 20°C: 0.55 Ohm/km

 

2 AWG

Nexans ref. 209783

  • Approximate weight: 153.86 kg/km
  • Conductor cross-section: 33.6 mm²
  • Nominal insulation thickness: 1.52 mm
  • Nominal outer diameter: 9.97 mm
  • Ampacity: 100.0 A
  • Max. DC resistance of the conductor at 20°C: 0.875 Ohm/km

 

2/0 AWG

Nexans ref. 209786

  • Approximate weight: 294.37 kg/km
  • Conductor cross-section: 67.4 mm²
  • Nominal insulation thickness: 2.03 mm
  • Nominal outer diameter: 13.73 mm
  • Ampacity: 150.0 A
  • Max. DC resistance of the conductor at 20°C: 0.436 Ohm/km

 

250 kcmil

Nexans ref. 209789

  • Approximate weight: 521.04 kg/km
  • Conductor cross-section: 127 mm²
  • Nominal insulation thickness: 2.41 mm
  • Nominal outer diameter: 18.17 mm
  • Ampacity: 230.0 A
  • Max. DC resistance of the conductor at 20°C: 0.232 Ohm/km

 

3/0AWG

Nexans ref. 209787

  • Approximate weight: 353.62 kg/km
  • Conductor cross-section: 85 mm²
  • Nominal insulation thickness: 2.03 mm
  • Nominal outer diameter: 14.92 mm
  • Ampacity: 175.0 A
  • Max. DC resistance of the conductor at 20°C: 0.346 Ohm/km

 

300 kcmil

Nexans ref. 209790

  • Approximate weight: 604.23 kg/km
  • Conductor cross-section: 152 mm²
  • Nominal insulation thickness: 2.41 mm
  • Nominal outer diameter: 19.44 mm
  • Ampacity: 260.0 A
  • Max. DC resistance of the conductor at 20°C: 0.194 Ohm/km

 

350 kcmil

Nexans ref. 209791

  • Approximate weight: 686.3 kg/km
  • Conductor cross-section: 177 mm²
  • Nominal insulation thickness: 2.41 mm
  • Nominal outer diameter: 20.61 mm
  • Ampacity: 280.0 A
  • Max. DC resistance of the conductor at 20°C: 0.166 Ohm/km

 

4 AWG

Nexans ref. 209782

  • Approximate weight: 109.07 kg/km
  • Conductor cross-section: 21.2 mm²
  • Nominal insulation thickness: 1.52 mm
  • Nominal outer diameter: 8.57 mm
  • Ampacity: 75.0 A
  • Max. DC resistance of the conductor at 20°C: 1.39 Ohm/km

 

4/0 AWG

Nexans ref. 209788

  • Approximate weight: 426.78 kg/km
  • Conductor cross-section: 107 mm²
  • Nominal insulation thickness: 2.03 mm
  • Nominal outer diameter: 16.25 mm
  • Ampacity: 205.0 A
  • Max. DC resistance of the conductor at 20°C: 0.274 Ohm/km

 

400 kcmil

Nexans ref. 209792

  • Approximate weight: 767.47 kg/km
  • Conductor cross-section: 203 mm²
  • Nominal insulation thickness: 2.41 mm
  • Nominal outer diameter: 21.7 mm
  • Ampacity: 305.0 A
  • Max. DC resistance of the conductor at 20°C: 0.145 Ohm/km

 

500 kcmil

Nexans ref. 209793

  • Approximate weight: 927.16 kg/km
  • Conductor cross-section: 253 mm²
  • Nominal insulation thickness: 2.41 mm
  • Nominal outer diameter: 23.65 mm
  • Ampacity: 350.0 A
  • Max. DC resistance of the conductor at 20°C: 0.116 Ohm/km

 

6AWG

Nexans ref. 209781

  • Approximate weight: 79.15 kg/km
  • Conductor cross-section: 13.3 mm²
  • Nominal insulation thickness: 1.52 mm
  • Nominal outer diameter: 7.45 mm
  • Ampacity: 55.0 A
  • Max. DC resistance of the conductor at 20°C: 2.21 Ohm/km

 

Description

Description

Applicable Standars

Centelsa by Nexans Low-Halogen cables are part of the Nexans Fire Safety offer that allows you to protect people's lives, anticipate risks and secure assets in the event of fires.

Our Low-Halogen Cables do not spread fire, have low smoke emission, do not emit toxic gases and have a maximum operating temperature of 90°C.

Application

Cables for low voltage electrical energy distribution, installations in buildings, inside premises, control panels and electronic circuits. Suitable for places with a high concentration of people, where low-halogen conductors and low smoke emission are required, which in the event of a fire will not generate toxic or corrosive gases that may affect the health of people and the condition of equipment and circuits electronics. The cables can be used for installations mentioned in NTC 2050 Article 310.

LHFR-LS cables have characteristics that make them SUITABLE FOR MEDICAL CARE FACILITIES where invasive procedures are carried out on people, such as surgery rooms, intensive or special care units, etc., since their insulation has very low leakage currents, complying with the provisions of RETIE numeral 28.3.2, literal h.

Suitable for installation in cable trays according to RETIE article 20.3, literal J, from 12 AWG gauge and larger.

Construction

Conductor

S8000 Aluminium

Insulation

Low halogen, flame retardant and low smoke emission opaque, dense, toxic and corrosive thermoplastic compound.

 

Applicable Standars

NTC 6182

Certificate

RETIE N° 07511 / RETIE N° 05915

Operating Temperature

90°C, obtaining greater current capacity compared to a 75°C cable, more efficient electrical design.

Operating Voltage

600 V

Marking

CENTELSA by NEXANS < Calibre AWG / Kcmil >  AL AA8000 LHFR-LS 600 V 90°C CT - HECHO EN COLOMBIA [M].

Ampacity Conditions

  • Ampacity to 90 °C conductor temperature, 30°C ambient temperature. No more than three current carrying condutors in a duct or pipe. According to NTC 2050, Table 310.15(B)(16) NTC 2050.

NOTE:

  • The data reported here are nominal and are subject to tolerances according to standards and normal manufacturing practices.
  • Other configurations not specified in this catalog may be available under special request and minimum manufacturing quantities.

Fire Safety - NEXANS

LHFR-LS Cables - Low Halogen

Characteristics

Characteristics

Construction characteristics

Construction characteristics

Conductor flexibility
Class B
Conductor material
Aluminum 8000 series
Insulation
Low Halogen Polyolefin

Dimensional characteristics

Dimensional characteristics

Number of cores
1

Electrical characteristics

Electrical characteristics

Operating voltage
600 V

Mechanical characteristics

Mechanical characteristics

Abrasion resistance
Good

Usage characteristics

Usage characteristics

Fire retardant
Method 1 - Vertical Tray (UL 2556/9.6)
Gases corrosivity
IEC 60754-1; IEC 60754-2
Gases toxicity
Zero toxicity to IEC 60684-2
Maximum operating temperature
90 °C
Smoke density
Low Smoke Emission IEC 61034-2

Resources

Resources

Contact us

Topics on which you wish to get more informations:

Required fields*

Please check your entry and try again.

An email address must contain a single @

Personal data protector

You have the right to object to the processing of your personal data and/or their use for direct marketing or commercial purposes

Thank you!

Thanks for contacting us. We will be in touch with you shortly.

Error

An error occurred. Please try again.

Close

Contact us

Required fields*

Please check your entry and try again.

An email address must contain a single @

Personal data protector

You have the right to object to the processing of your personal data and/or their use for direct marketing or commercial purposes

Thank you!

Thanks for contacting us. We will be in touch with you shortly.

Error

An error occurred. Please try again.

Close